SWDH60 Hydraulic rock drill

Other Models

SWDH60 is a simple hydraulic rock drill widely used for drilling small-diameter holes on medium hard or hard rocks.


▲ Equipped with internationally renowned rock drills that have powerful rock breaking capacity, drill at a fast speed and cost less energy.

▲ Key components such as the derrick, air compressor, platform, cab, arm and cutting rig are produced at the same platform, which makes them easy to be refitted with the SWDR80A cutting rig.

▲ Its amplitude adjustment, superstructure rotation, and traveling movements are as flexible and convenient as that of an excavator; moreover, its operating habits are the same as those of an excavator.

▲ It is equipped with hydraulic pressure adaptive and logic control module that enables the drilling movements to adapt to the change of rocks.

Operation parameterSWDH60
Drilling range36~60 mm
Drill rod diameter32mm
Drill rod length3.66m
Hole depth, max3.2m
Upper carriage rotation360°
Air compressor
ModelTA-120
Working pressure0.7MPa
Displacement1.5m³/min
Power11kW
Engine
ModelV3300-DI
Power54.9kW/2600rpm
Fuel tank capacity140L
Feed
Feed beam length4800mm
Feed stroke3500mm
Feed rate, max0.06m/s
Feed force, max7.5~10 kN
Travel capability
Traveling speed4.5/3.1 km/h
Traction force, max55kN
Gradeability25°
Ground clearance338mm
Ground pressure0.435bar
Rock-Drilling rig
ModelHC25
Bit shank specificationR32
Rotary speed130~230 rpm
Rotary torque320N.m
Impact pressure150bar
Impact energy150J
Diamension
Gross weight7.8t
Working(L×W×H)6.1×2.2×5.02 m
Transportation(L×W×H)8.5×2.2×3.15 m
Recommendation